SLURRYTUB
SLURRYTUB is a portable tub and filter for wet trade slurry washout that makes it easy to keep your job site clean and protect the environment.
Visit slurrytub.ca to Purchase
Clean up, made easy.
The SLURRYTUB system captures and filters the wet trade waste leaving visibly clear water to drain within the designated washout areas or be recycled. When dry enough, simply dispose of the hardened waste, along with the biodegradable filter into the work site garbage or other approved disposal method.
-
BEST THING EVER! It is the best, safest and environmentally friendly way to dispose of the concrete slurry after a days work. The filter sieves through the slurry leaving clear water to drain. Where have you been all my life?
-
Anywhere where you've got a tight site, tight access, and nowhere to clean up, it's the perfect product.
-
It's environmentally friendly and prevents any runoff going down into the drains or if you're working by the street, going into the gutters.
Why Choose SLURRYTUB
SLURRYTUB was created to significantly improve the environmental performance of building sites, save time on daily clean-ups, avoid significant penalties or fines, improve company reputations, and importantly - keep clients happy.
-
Protects Gardens & Drains
-
Happier Clients
-
Better For The Environment
-
Minimize Council Fines
-
Cleaner & Safer Sites
-
Quick & Easy To Use
Additional Product Features
SLURRYTUB FAQs
-
How do I get SLURRYTUB?
Purchase SLURRYTUB online or find a distributor near you on our SLURRYTUB website.
-
What is the water capacity of the SLURRYTUB?
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material - enough for your standard wheelbarrow washout. However, if greater capacity is needed on your job site, we recommend having another tub ready to go!
-
How long does it take for the slurry contents to dry and how do I dispose of the hardened waste?
It typically takes 30-60 minutes for the wet slurry to dry, however, this will vary depending on the contents of the washout material.
Once the waste has hardened, simply empty the contents and the biodegradable filter into the garbage or take the contents off-site and dispose of them safely following your local municipal guidelines.
-
How do I attach the SLURRYTUB filter to the tub?
Carefully remove the filter from the ziplock bag and open the filter, keeping the flap with the logo at the front of the tub. Once the filter is placed into the tub, carefully attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB. Make sure the filter flap is at the front and sits over the lower cut-out area on the tub.
-
Can I stand up my wheelbarrow in the SLURRYTUB without holding it?
The cut-out at the front of your SLURRYTUB is specifically tested and designed to support the most commonly available wheelbarrows. Your wheelbarrow should rest ‘hands-free’ in the SLURRYTUB front cut-out to allow you to wash it out with ease.
-
Where do I let the filtered water drain?
You should always allow filtered water from the SLURRYUTB drain into a designated wash-up area or capture the water and recycle it on the job - a great way to increase water savings on your job site.
-
How effective is the SLURRYTUB filtering process?
The filtered water which flows from SLURRYTUB is visibly clear. Typical laboratory testing of water samples shows Total Suspended Solids (TSS) of less than 50mg/L.
-
Can I use the SLURRYTUB after tiling, rendering, or plastering?
Yes! The low-micron-rated paper filter used in SLURRYTUB can be used for these types of cleanups. However, we don’t recommend it for use with paint, adhesives or waterproof membrane.